LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> XTS Base >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Heating And Cooling System >> Repair Instructions >> Engine Coolant Fan Shroud Replacement (LFX)

Engine Coolant Fan Shroud Replacement (LFX)

GM2769560Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Remove the intake manifold cover. Intake Manifold Cover Replacement (LFX) , or Intake Manifold Cover Replacement (LF3)
  2. Remove the front compartment front sight shield. Front Compartment Front Sight Shield Replacement
  3. Remove the front end upper tie bar. Front End Upper Tie Bar Replacement (With LF3) , or Front End Upper Tie Bar Replacement (Without LF3)
  4. Disconnect the engine coolant fan motor connectors.
  5. Reposition the electrical wiring harness.
1 Engine Coolant Fan Shroud Fastener (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
6 N.m (53 lb in)
2 Engine Coolant Fan Shroud
Procedure 
Transfer all necessary parts.
scientia non olet · About LEMON Manuals