Turbocharger Inlet Absolute Pressure Sensor Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Electrical Connector
2	Turbocharger Inlet Absolute Pressure Sensor Bolt CAUTION: Refer to Fastener Caution . Tighten 3N.m (27 lb in)
3	Turbocharger Inlet Absolute Pressure Sensor Procedure Inspect the O-ring and replace if necessary. Perform the intake system learned values reset. Intake System Learned Values Reset

Callout

Component Name

Electrical Connector

Turbocharger Inlet Absolute Pressure Sensor Bolt

CAUTION:

Tighten
3N.m (27 lb in)

Turbocharger Inlet Absolute Pressure Sensor

Procedure

Inspect the O-ring and replace if necessary.
Perform the intake system learned values reset. Intake System Learned Values Reset