Removal Procedure
- Disable the SIR system. SIR Disabling and Enabling
- Windshield Garnish Molding (1) - Remove - Windshield Garnish Molding Replacement
- Instrument Panel Lower Center Trim Panel - Left Side (2) - Remove - Instrument Panel Lower Center Trim Panel Replacement (Right Side)
- Instrument Panel Compartment (2) - Remove - Instrument Panel Compartment Replacement
- Instrument Panel Airbag Bolt (1) - Remove [3x]
- Disconnect the instrument panel airbag electrical connector from the instrument panel harness.
- Instrument Panel Upper Bolt (1) - Remove [9x]
- Instrument Panel Trim Pad (2) - Remove
- Disconnect electrical connections, if applicable.
- Transfer components as necessary.