LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> CTS V >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel Trim And Console Trim >> Repair Instructions >> Front Floor Console Cup Holder Plate Replacement >> Removal Procedure

Removal Procedure

  1. Instrument Panel Lower Center Trim Panel Replacement (Right Side) Instrument Panel Lower Center Trim Panel Replacement (Left Side)  - Left Side - Remove
  2. Front Floor Console Replacement  - Remove
  3. Transmission Control Lever Knob Replacement - Remove
  4. Front Floor Console Rear Trim Panel (1) - Remove
    GM3944184Courtesy of GENERAL MOTORS COMPANY
  5. Use a flat bladed plastic tool to remove.
  6. Disconnect all electrical connectors.
  7. Front Floor Console Trim Plate Bolt (1) - Remove [5x]
    GM3944250Courtesy of GENERAL MOTORS COMPANY
  8. Front Floor Console Armrest Hinge Cover (2) - Remove
  9. Open the compartment and remove the front floor console center compartment liner (1).
    GM3944316Courtesy of GENERAL MOTORS COMPANY
  10. Front Floor Console Trim Plate Bolt (2) - Remove [3x]
  11. Front Floor Console Compartment (1) - Remove
    GM3944331Courtesy of GENERAL MOTORS COMPANY
  12. Disconnect all electrical connectors.
  13. Front Floor Rear Console Side Trim Panel - Left Side (1) - Remove
    GM3944413Courtesy of GENERAL MOTORS COMPANY
  14. Use a flat bladed plastic tool to remove.
  15. Front Floor Console Trim Plate Bolt (1) - Remove [5x]
    GM3944468Courtesy of GENERAL MOTORS COMPANY
  16. Disconnect and reposition harness as necessary.
  17. Starting at the rear, disengage the retainers using a flat-bladed plastic tool.
  18. Front Floor Rear Console Side Trim Panel - Right Side (2) - Remove
  19. Automatic Transmission Control Indicator (1) - Remove
    GM3944505Courtesy of GENERAL MOTORS COMPANY
  20. Use a flat bladed plastic tool to remove.
  21. Disconnect all electrical connectors.
  22. Front Floor Console Trim Plate Bolt (1) - Remove [2x]
    GM3944761Courtesy of GENERAL MOTORS COMPANY
  23. Front Floor Console Front Compartment Liner (1) - Remove
    GM3944776Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Ensure that the door to the front floor console cup holder is fully seated in the open position.

  24. Front Floor Console Cup Holder Liner (2) - Remove
  25. Front Floor Console Trim Plate Bolt (3) - Remove [3x]
  26. Front Floor Console Trim Plate Bolt (1) - Remove [4x]
    GM3944784Courtesy of GENERAL MOTORS COMPANY
  27. Front Floor Console Cup Holder Plate (1) - Remove
    GM3944796Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The cup holder plate door motor assembly is not able to withstand any free falls without any damage to its components during the assembly processes. If the component is miss handled and dropped, the component is deemed nonfunctional and is not guaranteed to function properly. The motor assembly will need to be replaced.

  28. Disconnect all electrical connectors.
  29. Transfer components as necessary.
scientia non olet · About LEMON Manuals