LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> CTS Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Driver or Passenger Seat Adjuster Finish Cover Retainer Replacement

Driver or Passenger Seat Adjuster Finish Cover Retainer Replacement

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
GM2756072Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedures 
Remove the front seat cushion outer finish panel. Refer to Driver or Passenger Seat Cushion Outer Finish Panel Replacement (Without W2E) Driver or Passenger Seat Cushion Outer Finish Panel Replacement (With W2E) .
1 Driver or Passenger Seat Adjuster Finish Cover Retainer Screw (Qty: 2)
CAUTION:

Refer to Fastener Caution .
2 Driver or Passenger Seat Adjuster Finish Cover Retainer
Procedure 
Unclip the wire harness retainer from the seat adjuster finish cover retainer.
scientia non olet · About LEMON Manuals