LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> CTS Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Component Connector End Views (K47-K178)) >> Component Connector End Views >> K47 Rear Differential Clutch Control Module X2 (G96)

K47 Rear Differential Clutch Control Module X2 (G96)

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
GM3293632Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Rear Chassis
  • OEM Connector: 13503532
  • Service Connector: Service by Harness - See Part Catalog
  • Description: 16-Way F 1.5, 2.8 Series, Sealed (GY)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I Not Required Not Available No Tool Required Not Required Not Required Not Required Not Required
Pin Size Color Circuit Function Terminal Type ID Option
1 - GN 4916 Limited Slip Differential Solenoid High Side Control I -
2 - 7 - - - Not Occupied - -
8 - RD 4913 Rear Drive Motor High Side Control I -
9 - YE 4915 Limited Slip Differential Solenoid Low Side Control I -
10 - BK 926 Low Reference I -
11 - BU 925 Rear Differential Oil Pressure Sensor I -
12 - WH 923 5 Volt Reference I -
13 - RD 924 Rear Differential Oil Temperature Sensor I -
14 - - - Not Occupied - -
15 - BK 9000 Drain Wire I -
16 - BK 4914 Rear Drive Motor Low Side Control I -