Front Axle Propeller Shaft Heat Shield Replacement

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Lifting and Jacking the Vehicle (CTS)Lifting and Jacking the Vehicle (CTS-V) If equipped with LFX, remove the right side catalytic converter. Catalytic Converter Replacement - Right Side (LF3)Catalytic Converter Replacement - Right Side (LGX)Catalytic Converter Replacement - Right Side (LT4)
1	Front Axle Propeller Shaft Heat Shield Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Front Axle Propeller Shaft Heat Shield

Callout

Component Name

Preliminary Procedure

Raise and support the vehicle. Lifting and Jacking the Vehicle (CTS)Lifting and Jacking the Vehicle (CTS-V)
If equipped with LFX, remove the right side catalytic converter. Catalytic Converter Replacement - Right Side (LF3)Catalytic Converter Replacement - Right Side (LGX)Catalytic Converter Replacement - Right Side (LT4)

Front Axle Propeller Shaft Heat Shield Bolt [2x]

CAUTION:

Refer to Fastener Caution .

Tighten
9 N.m (80 lb in)

Front Axle Propeller Shaft Heat Shield