Propeller Shaft Transmission Flange Fluid Seal Replacement (All Wheel Drive)

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Transfer Case Assembly Replacement .
1	Propeller Shaft Transmission Flange Fluid Seal Procedure Use the J-6125-B hammer and J-36825-A remover to remove the seal. Use care in order to avoid damaging the output shaft bushing. Lubricate the seal with clean transmission fluid. Use the DT-50648 installer to install the seal. Special Tools DT-50648 Case Seal Installer J-6125-B Slide Hammer with Adaptor J-36825-A Output Shaft Oil Seal Remover For equivalent regional tools, refer to Special Tools .

Callout

Component Name

Preliminary Procedures
Transfer Case Assembly Replacement .

Propeller Shaft Transmission Flange Fluid Seal

Procedure

Use the J-6125-B hammer and J-36825-A remover to remove the seal. Use care in order to avoid damaging the output shaft bushing.
Lubricate the seal with clean transmission fluid.
Use the DT-50648 installer to install the seal.

Special Tools

DT-50648 Case Seal Installer
J-6125-B Slide Hammer with Adaptor
J-36825-A Output Shaft Oil Seal Remover

For equivalent regional tools, refer to Special Tools .