Installation Procedure
WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Install the NEW manual shift shaft seal (1) using DT-47770 seal installer.
Install the manual shift shaft (2) aligning the position switch assembly onto the shaft.
- Install the NEW manual shift shaft pin (1).
- Install the NEW manual shift shaft detent lever hub pin (3).
- Raise and install the transmission. Transmission Replacement (M5U with LT4) Transmission Replacement (M5N with LGX) Transmission Replacement (M5N with LTG)
- Install the control valve body. Control Valve Body Replacement (M5N) Control Valve Body Replacement
- Install the automatic transmission range selector lever. Automatic Transmission Range Selector Lever Replacement (M5N) Automatic Transmission Range Selector Lever Replacement (M5U)
- Reprogram the transmission. Solenoid Valve Characterization Reprogramming