Front Bumper Fascia Replacement (CTS-V)

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Front Compartment Front Sight Shield Replacement (CTS)Front Compartment Front Sight Shield Replacement (CTS-V) . Front Wheelhouse Liner Replacement (CTS)Front Wheelhouse Liner Replacement (CTS-V) . Front Bumper Fascia Air Deflector Replacement - Center Front Bumper Fascia Air Deflector Replacement - Center (CTS-V) .
1	Front Bumper Fascia Outer Reinforcement Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Front Bumper Fascia Bolt [8x] Tighten 4 N.m (35 lb in)
3	Front Bumper Fascia Outer Bracket Bolt [4x] Tighten 9 N.m (80 lb in)
4	Front Bumper Fascia Procedure Carefully push a small nylon wedge between the fascia and the headlamp bracket. Insert a small flat-bladed tool into the fascia slot and depress the snaps (2 on each side) one at a time and pull on the fascia at the same time to gradually remove the fascia from the headlamp bracket. Disconnect the electrical connector. Transfer components as necessary.