LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> CTS Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Instrument Panel Knee Bolster Replacement

Instrument Panel Knee Bolster Replacement

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
GM3448357
Callout Component Name

Preliminary Procedure

  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the driver side inflatable restraint instrument panel lower module. Refer to Instrument Panel Lower Airbag Replacement - Driver Side .
  3. Remove the left instrument panel outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement .
  4. Remove the left instrument panel lower trim panel insulator. Refer to Instrument Panel Lower Trim Panel Insulator Replacement - Left Side .
  5. Remove the left front floor console side trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Left Side 
  6. Remove the instrument panel center trim plate applique. Refer to Instrument Panel Center Trim Plate Applique Replacement .
1 Instrument Panel Knee Bolster Bolt (Qty: 4)
CAUTION:

Refer to Fastener Caution .


Tighten 
2.5 N.m (22 lb in)
2 Instrument Panel Knee Bolster

Procedures

  1. Use a flat bladed plastic trim tool in order to release the retainer clips securing the knee bolster to the instrument carrier.
  2. Disconnect electrical connections.
  3. Transfer all necessary components.
scientia non olet · About LEMON Manuals