Reaction Internal Gear and 1-2-3-4-5 Reverse Hub and 1-2-3-4-5 Reverse Clutch Plate Assembly Installation
WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Reaction Internal Gear and 1-2-3-4-5 Reverse Hub and 1-2-3-4-5 Reverse Clutch Plate Assembly Components
| Callout | Component Name |
|---|---|
| 1 | 1-2-3-4-5-Reverse Clutch Plate (Waved) |
| 2 | 1-2-3-4-5-Reverse Clutch Apply Plate |
| 3 | 1-2-3-4-5-Reverse Clutch Plate [3x] |
| 4 | 1-2-3-4-5-Reverse Clutch Plate [2x] |
| 5 | 1-2-3-4-5-Reverse Clutch Backing Plate |
| 6 | 1-2-3-4-5-Reverse Clutch Backing Plate Retaining Ring Procedure Select the correct retaining ring. Refer to 1-2-3-4-5 Reverse Clutch Backing Plate Retaining Ring Measurement .
NOTE:
The opening of the retaining ring should be in the 9 o'clock position as indicated by the arrow. |
| 7 | Reaction Carrier Thrust Bearing |
| 8 | Reaction Internal Gear and 1-2-3-4-5-Reverse Hub |
| 9 | 1-2-3-4-5-Reverse Clutch Hub Thrust Bearing |