Control Valve Solenoid Body Assembly Removal

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Control Valve Solenoid Body Assembly Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Control Valve Channel Plate Bolt [8x] M5 x 45
2	Control Valve Solenoid Body
3	Cooler Flow Blowoff Ball Valve [4x] NOTE: Observe the position of the ball check valves.
4	Control Valve Body Spacer Plate CAUTION: Do not use the old spacer plate. Install a NEW spacer plate. Reusing an old spacer plate may cause internal transmission leaks and transmission damage. Procedure DISCARD the spacer plate.
5	Control Valve Body Spacer Plate Retainer [2x] Procedure Remove and DISCARD the retainer.
6	Automatic Transmission Auxiliary Fluid Pump Ball Check Valve (Qty: 1 Without Surge Accumulator) (Qty: 3 With Surge Accumulator) NOTE: Observe the position of the ball check valve.
7	Cooler Flow Blowoff Ball Valve NOTE: Observe the position of the ball check valve.