Control Valve Solenoid Body Assembly Installation

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Control Valve Solenoid Body Assembly Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Cooler Flow Blowoff Ball Valve [4x] CAUTION: Refer to Ball Check Valve Grease Caution . Procedure Install the ball check valves in the correct location in the control valve solenoid body. Ball Check Valve Locations
2	Control Valve Body Spacer Plate CAUTION: Do not use the old spacer plate. Install a NEW spacer plate. Reusing an old spacer plate may cause internal transmission leaks and transmission damage.
3	Control Valve Body Spacer Plate Retainer [2x]
4	Cooler Flow Blowoff Ball Valve CAUTION: Refer to Ball Check Valve Grease Caution .
5	Automatic Transmission Auxiliary Fluid Pump Ball Check Valve (Qty: 1 Without Surge Accumulator) (Qty: 3 With Surge Accumulator) CAUTION: Refer to Ball Check Valve Grease Caution .
6	Control Valve Solenoid Body
7	Control Valve Channel Plate Bolt [8x] M5 x 45 Procedure Hand tighten the bolts.