LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> CTS Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Automatic Transmission - 8L45 (M5N) Or 8L90 (M5U) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Case Extension Disassemble (8L90) >> 1-2-3-4-5-Reverse Clutch Piston Removal

1-2-3-4-5-Reverse Clutch Piston Removal

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of 1-2-3-4-5-Reverse Clutch Piston Components
GM3774679Courtesy of GENERAL MOTORS COMPANY
1-2-3-4-5-Reverse Clutch Piston Removal

Callout Component Name
1 1-2-3-4-5-Reverse Clutch Piston
2 1-2-3-4-5-Reverse Clutch Piston Outer Seal
CAUTION:

Refer to Seal Reuse Caution .


Procedure 
Remove and DISCARD the seal.
3 1-2-3-4-5-Reverse Clutch Piston Inner Seal
Procedure 
Remove and DISCARD the seal.
4 Output Shaft Bearing

Special Tools

  • DT-26941  Bushing and Bearing Remover
  • DT-45124  Removal Bridge
  • DT-45124-9  Puller Leg

Equivalent regional tools: Special Tools