1-2-3-4-5-Reverse Clutch Piston Removal

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of 1-2-3-4-5-Reverse Clutch Piston Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	1-2-3-4-5-Reverse Clutch Piston
2	1-2-3-4-5-Reverse Clutch Piston Outer Seal CAUTION: Refer to Seal Reuse Caution . Procedure Remove and DISCARD the seal.
3	Procedure Remove and DISCARD the seal. 1-2-3-4-5-Reverse Clutch Piston Inner Seal (O-ring)
4	1-2-3-4-5-Reverse Clutch Piston Inner Seal Procedure Remove and DISCARD the seal.
5	Output Shaft Bearing Procedure Ensure the feet of DT-26941 Bushing and Bearing Remover are properly engaged with the bearing. Special Tools DT-26941 Bushing and Bearing Remover DT-45124 Removal Bridge DT-45124-9 Puller Leg Equivalent regional tools: Special Tools