1-2-3-4-5-Reverse Clutch Piston Dam Installation

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of 1-2-3-4-5-Reverse Clutch Piston Dam Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	1-2-3-4-5-Reverse Clutch Piston Return Spring
2	1-2-3-4-5-Reverse Clutch Piston Dam Seal CAUTION: Refer to Seal Reuse Caution . Procedure Install a NEW seal. Do NOT reuse the old seal.
3	1-2-3-4-5-Reverse Clutch Piston Dam
4	1-2-3-4-5-Reverse Clutch Piston Dam Retaining Ring Procedure Install a NEW retaining ring, it is not reusable. Use DT-47693-2 compressor and an arbor press to install the retaining ring. Special Tools DT-47693-2 Compressor Adapter Equivalent regional tools: Special Tools