1-2-3-4-5 Reverse Clutch Piston Installation

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of 1-2-3-4-5 Reverse Clutch Piston Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Output Shaft Bearing Special Tools DT-51087 Bearing Installer GE-8092 Driver Handle Equivalent regional tools: Special Tools
2	1-2-3-4-5-Reverse Clutch Piston Inner Seal (O-ring) CAUTION: Refer to Seal Reuse Caution . Procedure Install a NEW seal. Do NOT reuse the old seal.
3	1-2-3-4-5-Reverse Clutch Piston Inner Seal Procedure Install a NEW seal. Do NOT reuse the old seal.
4	1-2-3-4-5-Reverse Clutch Piston Outer Seal Procedure Install a NEW seal. Do NOT reuse the old seal.
5	1-2-3-4-5-Reverse Clutch Piston