2-3-4-6-8 and 4-5-6-7-8 Reverse Clutch Assembly Installation

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	2-3-4-6-8 and 4-5-6-7-8-Reverse Clutch Procedure Rotate the transmission horizontal to aid in installation of the 2-3-4-6-8 and 4-5-6-7-8 reverse clutch assembly. Verify proper installation of the 2-3-4-6-8 and 4-5-6-7-8 reverse clutch assembly by measuring as indicated (a). An approximate measurement of 62.78 mm (2.472 in) indicates correct installation.
2	2-3-4-6-8 and 4-5-6-7-8-Reverse Clutch Thrust Bearing Washer
3	2-3-4-6-8 and 4-5-6-7-8-Reverse Clutch Thrust Bearing

Callout

Component Name

2-3-4-6-8 and 4-5-6-7-8-Reverse Clutch

Procedure

Rotate the transmission horizontal to aid in installation of the 2-3-4-6-8 and 4-5-6-7-8 reverse clutch assembly.
Verify proper installation of the 2-3-4-6-8 and 4-5-6-7-8 reverse clutch assembly by measuring as indicated (a). An approximate measurement of 62.78 mm (2.472 in) indicates correct installation.

2-3-4-6-8 and 4-5-6-7-8-Reverse Clutch Thrust Bearing Washer

2-3-4-6-8 and 4-5-6-7-8-Reverse Clutch Thrust Bearing