LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> CTS Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Automatic Transmission - 8L45 (M5N) Or 8L90 (M5U) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> 2-3-4-6-8 and 4-5-6-7-8 Reverse Clutch Assemble (8L90) >> 2-3-4-6-8 and 4-5-6-7-8 Reverse Clutch Housing Bearing Installation

2-3-4-6-8 and 4-5-6-7-8 Reverse Clutch Housing Bearing Installation

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
GM3703374Courtesy of GENERAL MOTORS COMPANY
2-3-4-6-8 and 4-5-6-7-8 Reverse Clutch Housing Bearing Installation

Callout Component Name
1 2-3-4-6-8 and 4-5-6-7-8-Reverse Clutch Housing Bearing
Procedure 
Use DT-50906  installer and a press to install the bearing.
Special Tool 
DT-50906  Bearing Installer
Equivalent regional tools: Special Tools
scientia non olet · About LEMON Manuals