4-5-6-7-8 Reverse Clutch Plates Installation

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of 4-5-6-7-8 Reverse Clutch Plates Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	4-5-6-7-8-Reverse Clutch Plate (Waved) Procedure Align center tooth with notch on piston. Teeth on clutch plates go between notches on piston.
2	4-5-6-7-8-Reverse Clutch Plate [4x]
3	4-5-6-7-8-Reverse Clutch Plate [4x]
4	4-5-6-7-8-Reverse Clutch Backing Plate
5	4-5-6-7-8-Reverse Clutch Backing Plate Retaining Ring Procedure Select the correct retaining ring. Refer to 4-5-6-7-8 Reverse Clutch Backing Plate Retaining Ring Measurement (8L45) . NOTE: The retaining ring opening should be between the teeth on the clutch plates.