2-3-4-6-8 Clutch Plates Installation

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of 2-3-4-6-8 Clutch Plates Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	2-3-4-6-8 Clutch Apply Ring Procedure Tabs align with notches in piston.
2	2-3-4-6-8 Clutch Plate (Waved) Procedure Two tabs on clutch plate align with large notches in housing.
3	2-3-4-6-8 Clutch Apply Plate
4	2-3-4-6-8 Clutch Plate [4x]
5	2-3-4-6-8 Clutch Plate [5x]
6	2-3-4-6-8 Clutch Backing Plate
7	2-3-4-6-8 Clutch Backing Plate Retaining Ring Procedure Select the correct retaining ring. 2-3-4-6-8 Clutch Backing Plate Retaining Ring Measurement (8L45) Align The retaining ring opening with the backing plate tooth without a notch.