LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> CTS Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Automatic Transmission - 8L45 (M5N) Or 8L90 (M5U) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> 1-3-5-6-7 Clutch Assemble (8L45) >> Turbine Shaft Installation

Turbine Shaft Installation

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
GM3703541Courtesy of GENERAL MOTORS COMPANY
Turbine Shaft Installation

Callout Component Name
1 Turbine Shaft Seal
CAUTION:

Do not use old seal rings. Install NEW seal rings. Reusing old seal rings may cause internal transmission leaks and transmission damage.


Procedure 
Install a NEW seal. Do NOT reuse the old seal.
2 Turbine Shaft
3 Turbine Shaft Retaining Ring
Procedure 
Install a NEW retaining ring.
4 Turbine Shaft Seal
Procedure 
Install a NEW seal. Do NOT reuse the old seal.
scientia non olet · About LEMON Manuals