LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> CTS Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Automatic Transmission - 8L45 (M5N) Or 8L90 (M5U) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> 1-3-5-6-7 Clutch Assemble (8L45) >> 1-3-5-6-7 Clutch Bearing Installation

1-3-5-6-7 Clutch Bearing Installation

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
GM3703482Courtesy of GENERAL MOTORS COMPANY
1-3-5-6-7 Clutch Bearing Installation

Callout Component Name
1 1-3-5-6-7 Clutch Thrust Bearing

Procedure

  1. Use DT-51089  Bearing Installer and a press to install the bearing.
  2. Press from the marked side of the bearing.

Special Tools 
DT-51089  Bearing Installer
Equivalent regional tools: Special Tools
scientia non olet · About LEMON Manuals