Reaction Carrier Assembly, Output Carrier, and Output Shaft Installation

Special Tools

• DT-50921  Output Carrier/Shaft Lifting Tool

Equivalent regional tools: Special Tools

1. Fig 1: Exploded View Of Reaction Carrier Assembly, Output Carrier And Output Shaft Installation Components

   Courtesy of GENERAL MOTORS COMPANY

   Output Carrier Thrust Bearing (1) - Install

NOTE:

The output shaft seal is only present on All Wheel Drive (AWD) models.

2. Output Shaft Seal - O-Ring (2) - Install NEW
3. Output Shaft (3) - Install
4. Output Carrier Thrust Bearing (4) - Install
5. Output Sun Gear (5) - Install
6. Output Carrier (6) - Install
NOTE:

Ensure the park pawl is not engaged.

7. Reaction Carrier (7) - Install
8. Using DT-50921  Output Carrier/Shaft Lifting Tool installed through component, slowly lower into case.