Case Extension Assemble (8L45)

Special Tools

• DT-47693-2  Compressor Adapter
• DT-51087  Bearing Installer
• GE-8092  Driver Handle

Equivalent regional tools: Special Tools

1. Courtesy of GENERAL MOTORS COMPANY

   Automatic Transmission Case Extension Hole Plug (1) - Install and tighten to 11 N.m (97 lb ft) [2x]

2. Courtesy of GENERAL MOTORS COMPANY

   Assemble the tools as shown. Use the GE-8092  Driver Handle with DT-51087  Bearing Installer.

3. Output Shaft Bearing (1) - Install

4. Courtesy of GENERAL MOTORS COMPANY

   Assemble the tools as shown. Use the GE-8092  Driver Handle with DT-51087  Bearing Installer.

5. Output Shaft Bearing (1) - Install
CAUTION:

Refer to Seal Reuse Caution .

6. 1-2-3-4-5-Reverse Clutch Piston Inner Seal - O-Ring (2) - Install NEW
7. 1-2-3-4-5-Reverse Clutch Piston Inner Seal (3) - Install NEW
8. 1-2-3-4-5-Reverse Clutch Piston Outer Seal (4) - Install NEW
9. 1-2-3-4-5-Reverse Clutch Piston (5) - Install

10. Courtesy of GENERAL MOTORS COMPANY

    1-2-3-4-5-Reverse Clutch Piston Return Spring (1) - Install

CAUTION:

Refer to Seal Reuse Caution .

11. 1-2-3-4-5-Reverse Clutch Piston Dam Seal (2) - Install NEW
12. 1-2-3-4-5-Reverse Clutch Piston Dam (3) - Install
13. Use DT-47693-2  Compressor Adapter and an arbor press to install the retaining ring.
14. 1-2-3-4-5-Reverse Clutch Piston Dam Retaining Ring (4) - Install NEW