LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> ATS V >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 8L45 (M5N M5T) Or 8L90 (M5U) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> 2-3-4-6-8 and 4-5-6-7-8 Reverse Clutch Assembly Installation

2-3-4-6-8 and 4-5-6-7-8 Reverse Clutch Assembly Installation

  1. GM3977951Courtesy of GENERAL MOTORS COMPANY

    Rotate the transmission horizontal to aid in installation of the 2-3-4-6-8 and 4-5-6-7-8 reverse clutch assembly.

  2. 2-3-4-6-8 and 4-5-6-7-8-Reverse Clutch (1) - Install
  3. Verify proper installation of the 2-3-4-6-8 and 4-5-6-7-8 reverse clutch assembly by measuring as indicated (a). An approximate measurement of 62.78 mm (2.472 in) indicates correct installation.
  4. 2-3-4-6-8 and 4-5-6-7-8-Reverse Clutch Thrust Bearing Washer (2) - Install
    5. NOTE:

    Ensure proper orientation of bearing.

  5. 2-3-4-6-8 and 4-5-6-7-8-Reverse Clutch Thrust Bearing (3) - Install
scientia non olet · About LEMON Manuals