1-2-7-8 Reverse Clutch Piston Removal

Special Tools

• DT-35512  Bearing Installer
• DT-48056  Spring Compressor Bridge
• DT-50902  Adjustable Clutch Spring Compressor

Equivalent regional tools: Special Tools

1. Courtesy of GENERAL MOTORS COMPANY

   Assemble all the special tools as shown to remove the 1-2-7-8-Reverse clutch piston housing retaining ring.

2. 1-2-7-8-Reverse Clutch Piston Housing Retaining Ring (1) - Remove
3. 1-2-7-8-Reverse Clutch Piston Housing (2) - Remove
4. 1-2-7-8-Reverse Clutch Piston (3) - Remove
5. 1-2-7-8-Reverse Clutch Return Spring (4) - Remove
6. 1-2-7-8-Reverse Clutch Apply Ring (5) - Remove