1-2-7-8 Reverse Clutch Piston Installation

Special Tools

• DT-35512  Bearing Installer
• DT-48056  Spring Compressor Bridge
• DT-50902  Adjustable Clutch Spring Compressor

Equivalent regional tools: Special Tools

1. Courtesy of GENERAL MOTORS COMPANY

   1-2-7-8-Reverse Clutch Apply Ring (1) - Install

2. 1-2-7-8-Reverse Clutch Return Spring (2) - Install
3. 1-2-7-8-Reverse Clutch Piston (3) - Install
4. 1-2-7-8-Reverse Clutch Piston Housing (4) - Install
5. The opening of the retaining ring should be in the 9 o'clock position as indicated by the arrow.
6. Assemble special tools as shown to install retaining ring.
7. 1-2-7-8-Reverse Clutch Piston Housing Retaining Ring (5) - Install