| 2 - 3 - 4 - 6 - 8 and 4 - 5 - 6 - 7 - 8 Reverse Clutch Thrust Bearing (58) |
Inspect the bearing for wear or damage. |
| Output Carrier Assembly (73) |
- Inspect the carrier assembly for damaged pinion gears, thrust washers, pins, and rollers.
- Inspect for a damaged center support roller bearing assembly.
- Inspect for damaged thrust bearings.
- Inspect for damaged sun gears.
- Inspect the carrier assembly for damaged output carrier rear sun gear thrust bearing (captured).
- Inspect for damaged or stripped splines on the output carrier assembly.
|
| Output Sun Gear Thrust Bearing (75) |
Inspect the bearing for wear or damage. |
| Input Sun Gear Thrust Bearing (61) |
Inspect the bearing for wear or damage. |
| Input Sun Gear Assembly (69) |
Inspect for spline wear or damage. |
| 1 - 2 - 3 - 4 - 5 Reverse Clutch Hub Thrust Bearing (70) |
Inspect the bearing for wear or damage. |
| A/Trans Fluid Filter (46) |
- Inspect for damaged or restricted fluid filter assembly (26)
- Inspect for damaged fluid filter seal assembly (25) or improper sealing interface (leaks, fluid aeration).
|
| A/Trans Fluid Pump Seal (302) |
Inspect for worn or damaged seal. |