Actions Taken When the DTC Sets

P2808 

DTCs listed in the DTC Descriptor Category = Type B DTC

• Transmission Hot Mode = On
• TCC Control = Disabled
• Transmission Adaptive Pressure Control = Freeze current adapt values

P2809 

DTCs listed in the DTC Descriptor Category = Type A DTC

• Autostart/Autostop = Disabled - If equipped
• Line Pressure Command = Reduced
• Neutral Idle Mode = Disabled
• Transmission Hot Mode = On
• TCC Control = Enabled
• Torque Management System Performance - Forced Limited Engine Power = Requested
• Transmission Adaptive Pressure Control = Freeze current adapt values