Component Testing

Static Test

1. Ignition/Vehicle - Off
2. Disconnect the electrical connector: B280 Automatic Transmission Accumulator Solenoid Valve
3. Test for 17 to 19 ohms between the test points: Component Terminal 1 & Component Terminal 2
   • If not between 17 and 19 ohms 

     Replace the component: B280 Automatic Transmission Accumulator Solenoid Valve

   • Go to next step: If between 17 and 19 ohms 
4. Test for infinite resistance between the test points: Each Terminal of the component & The component's housing
   • If less than infinite resistance 

     Replace the component: B280 Automatic Transmission Accumulator Solenoid Valve

   • Go to next step: If infinite resistance 
5. All OK.