Circuit/System Description
For an overview of the component/system, refer to: Transmission Component and System Description
| Circuit | Description |
|---|---|
| B+ circuit Terminal 2 @ X175 | Supplied from a fuse. |
| Control circuit Terminal 8 @ X175 | The output circuit is switched to ground to activate the component. This is a normally closed valve that is controlled on/off. |
| Component | Description |
|---|---|
| B280 Automatic Transmission Accumulator Solenoid Valve | A solenoid valve is an electro-mechanically operated valve. The valve is controlled by an electric current through the solenoid. |
| K71 Transmission Control Module | The control module contains a microprocessor used to process input data to control outputs. The control module receives information from a variety of sensors, switches and serial data information from other control modules. This information is used to control a combination of solenoid valves to obtain the correct line pressure, gear ratio and torque converter clutch operation. |