Removal Procedure
Windshield Garnish Molding (1) - Remove - Windshield Garnish Molding Replacement
Radio Control (2) - Remove - Radio Control Assembly Replacement
Instrument Panel Extension (1) - Remove - Instrument Panel Extension Replacement
Instrument Panel Compartment (2) - Remove - Instrument Panel Compartment Replacement
Instrument Panel Upper Bolt (1) - Remove [3x]
Instrument Panel Airbag Bolt (1) - Remove [3x]
- Disconnect the instrument panel airbag electrical connector from the instrument panel harness.
Instrument Panel Upper Bolt (1) - Remove [4x]
Instrument Panel Upper Trim Panel (1) - Remove
- Use a plastic trim tool if necessary.
- Disconnect the hazard warning switch electrical connector.
- Transfer components as necessary.