Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Install the transmission fluid pump baffle (2).
Install the NEW transmission fluid baffle bolts (1) and tighten to 4 N.m (35 lb in) plus 45 degrees.
Fig 1: Exploded View Of Transmission Fluid Pan, Filter, Filter Seal, Gasket And Bolts With Tightening Sequence
Courtesy of GENERAL MOTORS COMPANY

Install the transmission fluid filter (4). Refer to Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement (Rear Wheel Drive) , or Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement (All Wheel Drive) .