LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> ATS Premium Performance >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 8L45 (M5N M5T) Or 8L90 (M5U) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Park Pawl Actuator Replacement >> Installation Procedure

Installation Procedure

  1. GM3817350Courtesy of GENERAL MOTORS COMPANY

    Connect the park pawl actuator rod (2) to the manual shift shaft position switch (1).

  2. Install the manual shift shaft position switch and park pawl assembly (1).
  3. GM3817211Courtesy of GENERAL MOTORS COMPANY

    Install the manual shift shaft (2) aligning the position switch assembly onto the shaft.

  4. Install the NEW manual shift shaft pin (1).
  5. Install the NEW manual shift shaft detent lever hub pin (3).
  6. Install the control valve body. Refer to Control Valve Body Replacement (M5N) , or Control Valve Body Replacement (M5U) .
  7. Reprogram the transmission. Solenoid Valve Characterization Reprogramming
scientia non olet · About LEMON Manuals