Heater Inlet and Outlet Pipe Installation
| Callout | Component Name |
|---|---|
| 1 | Heater Inlet and Outlet Pipe Gasket Procedure Install a NEW gasket. |
| 2 | Heater Inlet and Outlet Pipe |
| 3 | Heater Inlet and Outlet Pipe Bolt M6 x 25 [2x]
CAUTION:
Refer to Fastener Caution . Tighten 9 N.m (80 lb in) |
| 4 | Heater Inlet and Outlet Pipe Bolt M6 x 20 Tighten 9 N.m (80 lb in) |