LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> ATS Premium Performance >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> ENGINE MECHANICAL - 3.6L (LGX LF4) - REPAIR INSTRUCTIONS - OFF VEHICLE (2 Of 2) >> Repair Instructions - Off Vehicle >> Engine Front Cover Installation (LGX) >> Sealant Application

Sealant Application

GM4044434Courtesy of GENERAL MOTORS COMPANY
Sealant Application

Callout Component Name
1 Engine Front Cover

Procedure

  1. Ensure proper use of room temperature vulcanizing (RTV) sealant. Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
  2. Apply a 3 mm (0.118 in) bead of RTV sealant on the engine front cover as shown.
  3. Apply a 5 mm (0.197 in) bead of RTV sealant on the engine front cover as shown. Adhesives, Fluids, Lubricants, and Sealers (LGX)
NOTE:
  • No RTV sealant should be visible in the M12 bolt holes upon final assembly of front cover to engine.
  • Keep the RTV bead path on the outward edge of the t-joints to ensure proper sealant coverage.
2 3 mm (0.118 in) Bead of RTV Sealant
3 5 mm (0.197 in) Bead of RTV Sealant
4 M12 Bolt Holes
scientia non olet · About LEMON Manuals