Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Hose Fitting Gasket |
| Power Vacuum Brake Booster Pushrod Retainer |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Master Cylinder Nut | 23 N.m (17 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Hose Bracket Bolt | 10 N.m (89 lb in) |
| Brake Hose Fitting Bolt - Front (JE5) | 52 N.m (38 lb ft) |
| Brake Hose Fitting Bolt - Front (J55, J6G) | 40 N.m (30 lb ft) |
| Brake Hose Fitting Bolt - Rear (JE5, J55) | 49 N.m (36 lb ft) |
| Brake Hose Fitting Bolt - Rear (J6G) | 52 N.m (38 lb ft) |
| Brake Pedal Assembly Nut | 25 N.m (18 lb ft) |
| Brake Pipe Fitting | 18 N.m (13 lb ft) |
| Brake Pressure Modulator Valve Primary Brake Pipe Fitting - At Brake Pressure Modulator Valve | 32 N.m (24 lb ft) |
| Brake Pressure Modulator Valve Primary Brake Pipe Fitting - At Master Cylinder | 30 N.m (22 lb ft) |
| Brake Pressure Modulator Valve Secondary Brake Pipe Fitting - At Brake Pressure Modulator Valve | 32 N.m (24 lb ft) |
| Brake Pressure Modulator Valve Secondary Brake Pipe Fitting - At Master Cylinder | 30 N.m (22 lb ft) |
| Master Cylinder Reservoir Bolt | 8 N.m (71 lb in) |
| Power Brake Booster Pump M6 Bolt | 10 N.m (89 lb in) |
| Power Brake Booster Pump M12 Bolt | 70 N.m (52 lb ft) |
| Power Brake Booster Pump Bolt | 22 N.m (16 lb ft) |
| Power Vacuum Brake Booster Nut | 25 N.m (18 lb ft) |