Installation Procedure

Rear Brake Hose - Install
Courtesy of GENERAL MOTORS COMPANY

Brake Hose Fitting Gasket (1) [2x] @ Rear Brake Hose (2) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Brake Hose Fitting Bolt (1) - Install 52 N.m (38 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Brake Hose Retainer (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Brake Pipe Fitting (1) - Install 18 N.m (13 lb ft)
Bleed the brake system. Hydraulic Brake System Bleeding (Manual) , or Hydraulic Brake System Bleeding (Pressure)
Tire and Wheel Removal and Installation (Non V-Series) , or Tire and Wheel Removal and Installation (V-Series) - Install