Rear Compartment Lid Inner Panel Trim Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Rear Compartment Lid Latch Cover Replacement Rear Compartment Lid Hinge Cover Replacement
1	Rear Compartment Lid Inside Handle Fastener CAUTION: Refer to Fastener Caution . Procedure Use a small flat bladed tool to open the integral handle cover and access fastener. Tighten 2.5 N.m (22 lb in)
2	Rear Compartment Lid Inside Handle
3	Rear Compartment Lid Inner Panel Trim Retainer[8x] NOTE: Retainers are integral to backside of rear compartment lid inner panel trim.
4	Rear Compartment Lid Inner Panel Trim Procedure Use a flat bladed plastic trim tool. NOTE: Ensure the auxiliary rear compartment latch release handle is routed through the rear compartment lid inner panel trim.