Engine Block - Left - Front
WARNING: This page is about a different variant/trim than selected.
Engine Block - Left - Front
| Callout | Component Name |
|---|---|
| 1 | Engine Block Oil Gallery Plug Cap [2x] |
| 2 | Engine Block Oil Gallery Plug M16 [2x]
CAUTION:
Refer to Fastener Caution . Procedure Ensure proper use of room temperature vulcanizing (RTV) sealant. Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant Tighten 40 N.m (30 lb ft) |
| 3 | Cylinder Head Locating Pin [2x] |
| 4 | Knock Sensor |
| 5 | Knock Sensor Bolt Tighten 25 N.m (18 lb ft) |
| 6 | Engine Oil Pressure Sensor Tighten 35 N.m (26 lb ft) |
| 7 | Engine Block Core Hole Plug Tighten 45 N.m (33 lb ft) |
| 8 | Engine Block Oil Gallery Plug M16 Tighten 40 N.m (30 lb ft) |
| 9 | Piston Oil Nozzle [3x] |
| 10 | Piston Oil Nozzle Bolt [3x] Tighten 10 N.m (89 lb in) |
| 11 | Engine Front Cover Stud [3x] Tighten 15 N.m (11 lb ft) |