Turbocharger Air Inlet Adapter Installation
WARNING: This page is about a different variant/trim than selected.
Turbocharger Air Inlet Adapter Installation
| Callout | Component Name |
|---|---|
| 1 | Turbocharger Air Inlet Adapter Seal
NOTE:
Install a NEW seal. It is not reusable. |
| 2 | Turbocharger Air Inlet Adapter |
| 3 | Turbocharger Air Inlet Adapter Bolts
CAUTION:
Refer to Fastener Caution . Tighten 10 N.m (89 lb in) |