Camshaft Bearing Cap Assemble
WARNING: This page is about a different variant/trim than selected.
Camshaft Bearing Cap Assemble
| Callout | Component Name |
|---|---|
| 1 | Camshaft Bearing Cap |
| 2 | Camshaft Bearing Cap [2x] |
| 3 | Camshaft Bearing Cap Bolt [12x] Procedure Install and hand tighten |
Camshaft Bearing Cap Assemble
| Callout | Component Name |
|---|---|
| 1 | Dowel Pin [2x] |
| 2 | Camshaft Bearing Cap |
| 3 | Camshaft Carrier Bolt [4x] Procedure Install and hand tighten |
| 4 | Camshaft Bearing Cap Bolt Procedure Install and hand tighten |