LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> ATS Base, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (ENGINE MECHANICAL - 3.6L (LGX LF4) - REPAIR INSTRUCTIONS - OFF VEHICLE (2 Of 2)) >> Repair Instructions - Off Vehicle >> Camshaft Carrier Cleaning and Inspection >> Cleaning Procedure

Cleaning Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove any old thread sealant, gasket material or RTV sealant using EN-28410  remover.
  2. Ensure proper use of room temperature vulcanizing (RTV) sealant. Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
  3. Clean the camshaft carriers using a non corrosive solvent.
  4. Clean out debris from the bolt holes.
  5. WARNING:

    Refer to Safety Glasses Warning .

  6. Dry the camshaft carriers with compressed air.