LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> ATS Base, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (ENGINE MECHANICAL - 3.6L (LGX LF4) - REPAIR INSTRUCTIONS - OFF VEHICLE (1 Of 2)) >> Repair Instructions - Off Vehicle >> Piston, Connecting Rod, and Bearing Cleaning and Inspection (LF4) >> Connecting Rod Cleaning Procedure

Connecting Rod Cleaning Procedure

WARNING: This page is about a different variant/trim than selected.
CAUTION:

Do not clean titanium components with chlorinated solvents. Brake parts, and similar cleaning solvents, safety solvents, or refrigerant that contains chlorofluorocarbons (CFCs) should not be used. Using chlorinated solvents to clean titanium components can result in component damage, leading to stress corrosion cracking that may be undetected with normal visual inspection. Acceptable materials for cleaning titanium components include non-chlorinated solvents, alcohol, acetone, and methanol.

  1. Clean the connecting rods with proper solvents.
    2. WARNING:

    Refer to Safety Glasses Warning .

  2. Dry the connecting rod using compressed air.
  3. Remove the connecting rod cap and clean the threads.
  4. Remove the connecting rod bearing and discard. Never reuse a connecting rod bearing used in a running engine.
scientia non olet · About LEMON Manuals