Cylinder Head Removal - Left Side (LGX)
WARNING: This page is about a different variant/trim than selected.
 Courtesy of GENERAL MOTORS COMPANY
|
| Callout |
Component Name |
| 1 |
Cylinder Head Bolt M11 x 178 [8x]
Procedure
Remove and DISCARD the bolts. |
| 2 |
Cylinder Head Bolt M8 x 80.8 [2x]
Procedure
Remove and DISCARD the bolts. |
| 3 |
Cylinder Head |
| 4 |
Cylinder Head Gasket
Procedure
Remove and DISCARD the cylinder head gasket. |