LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> ATS Base, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (ENGINE MECHANICAL - 3.6L (LGX LF4) - REPAIR INSTRUCTIONS - OFF VEHICLE (1 Of 2)) >> Repair Instructions - Off Vehicle >> Compressor Air Intake Turbocharger Removal - Left Side (LF4) >> Turbocharger Oil Feed Pipe Removal

Turbocharger Oil Feed Pipe Removal

WARNING: This page is about a different variant/trim than selected.
GM3239452Courtesy of GENERAL MOTORS COMPANY
Turbocharger Oil Feed Pipe Removal

Callout Component Name
1 Turbocharger Oil Feed Pipe Bolt
2 Turbocharger Oil Feed Pipe Gaskets
NOTE:

Discard gaskets, they are not reusable.
3 Turbocharger Oil Feed Pipe

Procedure

  1. Use 3/8" Jiffy-tite® quick disconnect tool to remove the coolant return pipe.
  2. Refer to Compressor Air Intake Turbocharger Cleaning and Inspection
4 Turbocharger Oil Feed Pipe Fitting
NOTE:

Discard fitting, they are not reusable.
scientia non olet · About LEMON Manuals