LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> XTS Livery >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.6L (LFX LF3) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Engine Mount Replacement - Right Side (LF3)

Engine Mount Replacement - Right Side (LF3)

GM3330279Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (LF3) .
  2. Install engine support fixture. Refer to Engine Support Fixture (LF3) .
  3. Prior to removing the mount, mark the mount location using spray paint or a marker for correct positioning during installation.
  4. Remove the radiator inlet hose connector. Refer to Radiator Inlet Hose Connector Replacement (LFX, LF3) .
1 Engine Mount Fastener
CAUTION:

Refer to Fastener Caution .


Tighten 
62 N.m (46 lb ft)
2 Engine Mount Fastener (Qty: 3)
Tighten 
62 N.m (46 lb ft)
3 Engine Mount Fastener (Qty: 2)
Tighten 
62 N.m (46 lb ft)
4 Engine Mount
scientia non olet · About LEMON Manuals