LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> XTS Livery >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 3.6L (LFX LF3) - Repair Instructions >> Repair Instructions >> Turbocharger Wastegate Actuator Replacement - Right Side (LF3) >> Removal Procedure

Removal Procedure

  1. Steering Gear - Remove - Steering Gear Replacement (AWD, LF3, NXC)
  2. Turbocharger Heat Shield - Remove - Turbocharger Heat Shield Replacement (Front)Turbocharger Heat Shield Replacement (Rear)
  3. GM4843821Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Note the position of the turbocharger wastegate actuator arm retainer for re-installation.

    Remove the turbocharger wastegate actuator arm retainer (1).

  4. Separate the turbocharger wastegate actuator arm (2) from the turbocharger.
  5. GM4843822Courtesy of GENERAL MOTORS COMPANY

    Disconnect the charge air bypass valve vacuum tube (1) from the turbocharger wastegate actuator. Plastic Collar Quick Connect Fitting Service 

  6. Remove the turbocharger wastegate actuator fasteners (2).
  7. Remove the turbocharger wastegate actuator (3) from the vehicle.
scientia non olet · About LEMON Manuals